Understanding Class V Cavities and Their Restoration
Have you ever felt that sharp twinge of pain when drinking something cold? You might be experiencing a Class V cavity. These unique lesions occur at the neck of your tooth where the crown meets the root – a vulnerable spot that requires special attention.
When patients ask me about the best restorative material for class 5 cavity treatments, I always explain that the answer depends on their specific situation. After three decades of restoring smiles, I’ve learned that what works wonderfully for one patient might not be ideal for another.
Here’s a helpful comparison of the top options we consider:
| Material | Strength | Retention | Aesthetics | Fluoride Release | Best For |
|---|---|---|---|---|---|
| Resin-Modified Glass Ionomer | Moderate | Excellent | Good | High | Overall best choice for most Class V lesions |
| Composite Resin | High | Good | Excellent | Low | Highly visible areas with good isolation |
| Glass Ionomer Cement | Low | Good | Fair | High | High caries risk patients |
| Compomer | Moderate | Good | Good | Moderate | Balance between aesthetics and fluoride release |
| Bioactive Materials | Moderate | Good | Good | Variable | Long-term protection and remineralization |
Class V cavities can arise from several causes – traditional decay, toothbrush abrasion (those vigorous brushers!), acidic erosion from diet, or even occlusal stress from grinding. Regardless of the cause, these lesions deserve prompt attention to prevent sensitivity, aesthetic concerns, and potential tooth loss.
The location of these cavities makes them particularly tricky to restore. They sit right at the junction where enamel meets dentin, often extending onto the root surface. This unique position affects how well different materials bond and function over time.
Research consistently shows that resin-modified glass ionomers (RMGICs) provide excellent survival rates for most Class V restorations. They offer a beautiful balance of retention, fluoride release, and aesthetics. However, for front teeth where appearance is paramount, composite resin might be the better choice despite its more technique-sensitive application.
At PS Dental Services, we carefully evaluate each case, considering factors like:
- Location and visibility of your lesion
- Moisture control possibilities during treatment
- Your aesthetic expectations and smile line
- Caries risk and oral hygiene habits
- Presence of grinding or clenching habits
This personalized approach ensures you receive the truly best restorative material for class 5 cavity treatment for your unique situation.
What Makes Class V Cavities Unique?
Class V cavities occur at the cervical third of the tooth (the neck region), where the crown meets the root. This special location creates challenges that make these restorations particularly tricky for dentists and uncomfortable for patients.
What makes these lesions so challenging? For starters, they typically cross the cemento-enamel junction (CEJ), meaning your dentist must bond to both enamel and dentin/cementum – two very different surfaces. The cervical area also has much thinner enamel that tapers to nothing at the CEJ, giving us less ideal bonding substrate to work with.
Moisture control becomes a real headache too! The proximity to your gums makes isolation difficult, and we all know how tricky it can be to keep an area dry when it’s right next to tissue that naturally releases fluid. These areas also experience unique stress patterns during chewing that can loosen restorations over time.
And let’s not forget – these cavities are often in smile-zone areas, especially on front teeth, making aesthetics a top priority for many patients.
A UK study found that most Class V restorations (68.4%) were placed in canines or premolars, with 83% involving both enamel and dentin. Interestingly, most patients receiving these restorations were between 51-60 years old, showing how these problems become more common as we age.
Carious Class V Lesions
When decay causes your Class V cavity, certain patterns emerge:
As your gums naturally recede with age, root surfaces become exposed and vulnerable to decay. These areas are perfect traps for plaque, especially if brushing and flossing aren’t thorough. Many of our older patients at PS Dental Services face this challenge.
Dry mouth dramatically increases risk in these areas. Whether from medications or aging, reduced saliva means less natural protection. Even more concerning, decay spreads faster in these regions because cementum and dentin contain less mineral than enamel.
Dr. Marc Geissberger puts it perfectly: “I view untreated Class V lesions as missed opportunities to improve the function, longevity, and beauty of our patients’ dentition.” At PS Dental Services, we couldn’t agree more – catching these early makes all the difference!
Non-Carious Cervical Lesions (NCCLs)
Not all Class V problems come from decay. Many non-carious cervical lesions (NCCLs) result from everyday habits:
Abrasion typically comes from aggressive toothbrushing with hard bristles or gritty toothpaste. We’ve seen patients literally brush away their tooth structure!
Erosion happens through chemical dissolution from acidic foods, drinks, or gastric reflux. Those lemon water habits or untreated acid reflux can slowly dissolve tooth structure.
Abfraction occurs when excessive biting forces cause tooth flexure, creating microfractures where enamel and dentin meet at the neck of the tooth. Night grinding is often the culprit here.
Most commonly, we see combined mechanisms – several factors working together to create these lesions.
Research shows NCCLs affect between 11-62% of people worldwide, with some studies reporting rates as high as 85%! These lesions require special consideration when selecting the best restorative material for class 5 cavity treatment, especially when they occur in teeth under significant biting stress.
As Dr. Lowe explains, “Restoring these areas will at least provide a ‘cushion’ to prevent (or lessen) continual damage from occlusal trauma.” This protective function is why we take these lesions seriously at PS Dental, even when they’re not causing immediate symptoms.
Scientific research on non-carious cervical lesions continues to evolve our understanding of these complex problems, helping us provide better care for our Tigard neighbors.
The Main Material Players for Class V Restorations
When it comes to finding the best restorative material for class 5 cavity treatment, you’ve got several excellent options to consider. Each material brings its own special qualities to the table, and at PS Dental Services, we carefully match these properties to your specific needs.
Composite Resin
Composite resin continues to be a favorite for Class V restorations, especially when appearance matters. In fact, a UK practice study found dentists choose composite for nearly 41% of all Class V cases.
These tooth-colored materials offer beautiful aesthetics with excellent shade-matching possibilities. When Dr. Sepehri places a well-crafted composite restoration, you might not even be able to tell where your natural tooth ends and the filling begins! That’s why many of our patients at PS Dental Services choose our Tooth Color Filling option.
Composites also allow for conservative preparations, preserving more of your healthy tooth structure. They resist wear nicely and can be polished to a beautiful shine right away.
The main drawback? Composites can be a bit fussy about moisture. For those deep Class V cavities that extend below the gumline, keeping things dry becomes challenging. They also require careful bonding techniques and don’t release much fluoride to help prevent future decay.
Conventional Glass Ionomer Cement
Glass ionomer cements (GICs) bring something special to the table – they chemically bond directly to your tooth without needing separate bonding agents. This makes them particularly forgiving in situations where keeping things perfectly dry is difficult.
One of the biggest advantages of GICs is their impressive fluoride release. They act like little fluoride reservoirs, releasing this cavity-fighting mineral and then recharging when you use fluoride toothpaste or rinses. For patients with high cavity risk, this feature alone can be worth its weight in gold!
GICs also expand and contract at nearly the same rate as your natural tooth when temperatures change in your mouth – a scientific way of saying they work harmoniously with your tooth structure.
The downside? They’re not as strong as composites and their surface tends to be a bit rougher and more opaque. But a 10-year study has shown they still provide excellent longevity for Class V restorations, especially for patients who need that cavity-fighting boost.
Resin-Modified Glass Ionomer (RMGIC)
If I had to pick the overall champion for the best restorative material for class 5 cavity treatment, resin-modified glass ionomers would often take the crown. These clever hybrids combine the best aspects of glass ionomers with added resin components for improved strength.
The research backs this up too. Studies by F.J. Trevor Burke found that “Resin-modified glass ionomer materials appear to provide optimal survival for a Class V restoration.” Another clinical comparison showed RMGIC had an impressive 98.2% retention rate at 6-18 months, with only 1.8% loss after 2.5-3.5 years. That’s dramatically better than conventional GICs, which lost almost 18% of restorations in the same timeframe.
RMGICs offer high fluoride release like their conventional counterparts, but with better physical properties. They’re less technique-sensitive than composites and more forgiving in slightly moist environments. Their dual-cure setting mechanism (they set with both light activation and a chemical reaction) ensures a complete cure even in deep areas.
While not quite as pretty as pure composites, modern RMGICs offer acceptable aesthetics for many situations. For our patients at PS Dental Services who need that perfect balance of retention, fluoride protection, and reasonable appearance, RMGICs are often our go-to choice.
Compomer
Compomers (polyacid-modified composite resins) sit right in the middle of the spectrum between composites and glass ionomers. They’re quite popular in clinical practice – that same UK study found them to be the second most frequently used material (23.46%) for Class V restorations.
Compomers offer better aesthetics than glass ionomers while still providing some fluoride release (though not as much as GICs). They handle nicely during placement and have better physical properties than conventional glass ionomers.
They do require a bonding system like composites, and over time they absorb some water, which can affect their long-term performance. Think of compomers as a compromise option when you want some fluoride benefit without sacrificing too much in the appearance department.
Emerging Bioactive & Giomer Options
The newest kids on the block are materials with bioactive properties that actively interact with your tooth structure. These exciting options are changing how we think about fillings.
Bioactive materials like ACTIVA BioACTIVE-RESTORATIVE don’t just sit passively in your tooth – they actively release and recharge calcium, phosphate, and fluoride ions. They form a protective layer that helps seal the margins between filling and tooth. Their moisture-friendly chemistry makes them ideal for those tricky spots where keeping things dry is challenging.
Giomers blend glass ionomer technology with composite materials using special S-PRG fillers. These smart materials release ions that help neutralize acids in your mouth, protecting your restoration’s edges from new decay. As Dr. Lowe notes, they “can help neutralize bacterial acids and protect gingival margins in Class V restorations.”
At PS Dental Services, we stay at the forefront of these material advancements to ensure you receive the most appropriate treatment for your specific situation. Whether you need superior aesthetics, maximum fluoride protection, or something in between, we’ll help you find the best restorative material for class 5 cavity treatment that fits your unique needs.
How to Pick the best restorative material for class 5 cavity
Choosing the best restorative material for class 5 cavity treatment isn’t a one-size-fits-all situation. In my years at PS Dental Services, I’ve learned that successful outcomes depend on carefully matching the material to each unique clinical situation.
Location & Isolation Considerations
Where your cavity sits makes a huge difference in what material will work best:
For cavities above the gumline where we can keep things nice and dry, composite resin often gives us the most beautiful results. But let’s be honest—many Class V lesions sneak below the gumline, making moisture control a real challenge.
In these trickier spots, resin-modified glass ionomer cement (RMGIC) becomes your friend. It’s much more forgiving when things get a little damp, which is why it’s often our go-to at PS Dental Services for subgingival lesions.
Getting good isolation is always the goal, though it’s not always easy in these areas. While rubber dam is ideal, sometimes we need to get creative with retraction cord, cotton rolls, or specialized retractors. As Dr. Geissberger wisely notes, “Use the smallest retraction cord size to protect the periodontium”—a gentle reminder that tissue health matters just as much as the restoration itself.
Which material is the best restorative material for class 5 cavity when aesthetics matter?
When your cavity is in a spot everyone can see when you smile, looks really do matter. For these front-and-center cases, we have several fantastic options:
Nanohybrid composites shine here—they polish beautifully and come in shades that blend seamlessly with your natural tooth. For smaller lesions, flowable composites work wonderfully, conforming perfectly to all the nooks and crannies of the cavity.
The real art comes in the layering technique. We often start with a slight enamel bevel to create a gradual transition, followed by a thin layer of flowable composite, topped with a final layer of nanohybrid that perfectly matches your tooth shade. With careful contouring and polishing, the results can be stunning. As Dr. Geissberger puts it, “It is virtually impossible to see where the restoration ends and the tooth begins.”
At PS Dental, we take pride in these invisible restorations that let you smile with complete confidence.
Is fluoride release a must for the best restorative material for class 5 cavity in high-risk patients?
For patients with higher cavity risk, materials that release fluoride can be a game-changer. If you’re dealing with dry mouth, have multiple active cavities, struggle with oral hygiene, or have exposed root surfaces, you’ll benefit greatly from these protective materials.
RMGIC often proves to be the best restorative material for class 5 cavity treatment for our high-risk patients. It delivers excellent fluoride release while offering better durability than traditional glass ionomers. For patients who need both protection and decent aesthetics, giomers provide a nice middle ground with moderate fluoride release and improved looks.
At PS Dental Services, we don’t just fix the immediate problem—we look at the bigger picture. That’s why we also offer comprehensive periodontal therapy to address underlying issues that might be contributing to your cavity risk.
Patient Factors & Occlusal Stress
Do you clench or grind your teeth? These habits create forces that can make Class V restorations pop out prematurely. The neck of your tooth flexes slightly under these pressures, challenging even the strongest bonding agents.
For patients with these issues, we often recommend RMGIC because it provides what Dr. Lowe calls a “cushion effect” that absorbs stress. Bioactive materials with some elasticity also perform well under pressure.
Of course, treating the underlying cause is just as important as choosing the right filling material. At PS Dental Services, we might recommend a night guard along with your restoration, and in some cases, we’ll incorporate special retention features into the preparation to help your filling stay put.
For teeth that are too damaged to save with a simple filling, we offer Decayed Teeth Removal, though our passion is always preserving your natural teeth whenever possible.
The bottom line? Choosing the best restorative material for class 5 cavity treatment means considering all these factors—location, aesthetics, cavity risk, and bite forces—to create a restoration that not only looks great but stands the test of time. At PS Dental Services, we’re committed to finding that perfect match for your unique situation.
Preparation & Bonding Techniques that Boost Longevity
The success of Class V restorations depends not just on material selection but on proper preparation and bonding techniques:
Preparation Design
When it comes to preparing Class V cavities, there’s a real art to balancing conservation with retention. For carious lesions, our approach at PS Dental Services is to gently remove all decay while being as conservative as possible with healthy tooth structure. Think of it as carefully removing a stain from a favorite shirt—you want to target just the problem area.
With non-carious cervical lesions (NCCLs), the preparation is often even more minimal. We typically roughen the surface to create microscopic “hooks” for the material to grab onto. Creating a butt joint at the gingival margin provides a clean finish line, while adding a slight bevel at the occlusal enamel margin helps blend the restoration seamlessly with your natural tooth.
“Use of an irregular bevel at the DEJ improves bond strength and camouflages the restoration,” explains Dr. Geissberger, and we couldn’t agree more. That little bevel makes a big difference in how natural your restoration looks!
For teeth that might be under extra stress—like if you’re a nighttime teeth grinder—we sometimes add special retention features. A tiny groove created with a fissurotomy bur at the gingivo-pulpal line angle can work wonders for keeping that filling in place for years to come. Think of it as adding a little anchor for your restoration to hold onto when the going gets tough.
Bonding Protocols
The way we bond materials to your tooth is a bit like choosing the right glue for a home project—different materials need different approaches:
For composite resins, we typically use either a selective etch technique (where we only etch the enamel) or a total-etch approach depending on the specific situation. We’ve found that applying MMP inhibitors like chlorhexidine can significantly improve the long-term durability of these bonds—it’s like adding a preservative that keeps the bond from breaking down over time. Our universal adhesives are chosen for their proven track record of creating lasting bonds.
Glass ionomers take a different approach. Rather than a complex bonding system, we simply condition the tooth with polyacrylic acid (a mild acid that preps the surface beautifully). No separate bonding agent is needed, which simplifies the process. The trick is keeping everything dry during the initial set—like protecting a freshly poured sidewalk from rain until it hardens.
For the best restorative material for class 5 cavity situations where we use RMGICs (resin-modified glass ionomers), we condition with polyacrylic acid, then light-cure according to the manufacturer’s instructions. We often apply a protective surface coating afterward—think of it as putting a clear sealant over a freshly painted wall for extra protection.
Bioactive materials are the new kids on the block, and each has its own specific instructions. Many don’t require separate bonding agents, which can be a real time-saver. The key with these materials is maintaining a slightly moist field—not too wet, not too dry, but just right (like Goldilocks would prefer).
At PS Dental Services, we follow evidence-based bonding protocols with meticulous attention to detail. It’s these little steps—often invisible to the patient—that make the difference between a restoration that lasts for years and one that needs early replacement. Our goal is always to provide you with restorations that not only look great but stand the test of time, giving you one less dental worry to think about.
Post-Operative Care, Maintenance & Expected Longevity
So you’ve just had your Class V restoration placed – what now? Taking care of your new filling isn’t complicated, but it does require some attention to ensure it lasts as long as possible.
Expected Longevity
Good news! With proper care, your Class V restoration can serve you well for many years. Research shows some impressive survival rates:
Resin-modified glass ionomer materials (our frequent go-to choice) show remarkable staying power – 98.2% remain perfectly in place at 6-18 months, with only 1.8% loss even after 2.5-3.5 years. That’s impressive retention!
Composite restorations aren’t far behind, with survival rates exceeding 80% at the 5-year mark. Even conventional glass ionomers have shown they can go the distance, with good performance in 10-year studies.
Of course, these are averages – your individual results may vary based on your oral habits, diet, and other factors unique to your mouth.
Common Failure Modes
Understanding what might go wrong helps us prevent problems. Class V restorations typically encounter a few common issues:
Loss of retention is the most frequent problem, especially in non-carious lesions that experience significant biting forces. Think of it as a tiny filling constantly being flexed – eventually, something has to give.
Marginal discoloration often appears at the gingival (gum-line) margin. This staining doesn’t necessarily mean the restoration has failed, but it can be cosmetically concerning for some patients.
Secondary caries (new decay around the filling) occurs more frequently in high-risk patients. This is where those fluoride-releasing materials really earn their keep!
Material wear can happen over time, particularly with conventional glass ionomers, which aren’t quite as durable as some other options.
Maintenance Recommendations
Taking care of your Class V restoration isn’t rocket science, but a few simple habits can dramatically extend its lifespan:
At home, brush gently near the gumline with a soft-bristled toothbrush. Aggressive brushing is actually what causes many cervical lesions in the first place! Use fluoride toothpaste daily – it helps recharge fluoride-releasing materials and protects vulnerable root surfaces.
For high-risk patients, we often recommend additional fluoride products like rinses or prescription-strength toothpaste. Think of it as giving your restoration a little extra protection.
Professional maintenance is equally important. Regular dental check-ups (typically every 6 months) allow us to catch any issues early. During these visits, we’ll remove any plaque and calculus build-up, apply topical fluoride to recharge your restoration, and evaluate your bite forces to see if adjustments might help.
If we do spot small defects, don’t worry! Many can be repaired rather than completely replaced. At PS Dental Services, we take a conservative approach, preserving as much natural tooth structure as possible.
When a full replacement becomes necessary, we offer comprehensive Replacing Tooth Filling services. We may adjust our material selection based on how the previous restoration performed – that’s the advantage of establishing a long-term relationship with your dental provider.
The best restorative material for class 5 cavity treatment is only as good as the care it receives afterward. With proper maintenance and regular check-ups, we can help ensure your restoration serves you well for years to come.
At PS Dental Services, we’re committed to partnering with you for the long haul – not just placing restorations, but helping maintain them through education, preventive care, and timely intervention when needed.
Emerging “Smart” & Bioactive Restoratives on the Horizon
The world of dental materials is constantly evolving, and it’s an exciting time for Class V restorations! As someone who’s watched dental materials transform over decades, I’m particularly enthusiastic about several innovations that could change how we approach these challenging lesions.
Bioactive Glass Composites
Remember when fillings were just “plugs” that sat in your tooth? Those days are disappearing as bioactive glass composites enter the scene. These materials don’t just fill the space – they actively participate in your tooth’s health!
These remarkable materials contain special glass particles that release calcium and phosphate ions continuously after placement. What’s truly fascinating is how they form a layer of hydroxyapatite (the natural mineral in your teeth) at the margins where the filling meets your tooth. It’s almost like they’re creating a “living seal” that can adapt and respond to your mouth’s environment.
Some researchers are even developing versions with “self-healing” properties that could repair tiny gaps at the margins over time. Imagine a filling that fixes itself!
Advanced Giomer Technology
Giomers have been around for a while, but the next generation is something special. These materials combine the best features of glass ionomers and composites, with some impressive improvements:
The latest versions release and recharge ions much more effectively, providing better protection against recurring decay. They’re also stronger and more durable than earlier versions, while looking much more natural in your smile. Many contain antibacterial components that actively fight bacteria right at the restoration margins.
As Dr. Lowe mentioned, these materials “can help neutralize bacterial acids and protect gingival margins in Class V restorations” – a significant benefit for our patients with higher cavity risk.
Calcium Silicate Liners
For our patients with deeper Class V lesions that approach the pulp (the nerve center of your tooth), products like TheraCal LC and Biodentine are game-changers.
These materials create an alkaline environment that promotes healing and stimulates your tooth to form protective dentin bridges. This means we can often save teeth that might otherwise need root canal treatment. They’re particularly valuable in deep cervical lesions where the pulp might be very close to the surface.
At PS Dental Services, we’ve seen impressive results using these materials as protective bases under our restorations for patients with sensitive teeth or deep lesions.
Digital Dentistry Integration
Digital technology is changing every aspect of dentistry, including how we approach Class V restorations:
Soon, we may be using 3D printing to create custom-fitted restorations that match your tooth’s exact contours. Digital scanning already helps us achieve better marginal fit in many restorations, reducing the chance of leakage and recurrent decay. CAD/CAM materials specifically designed for cervical lesions are being developed with optimized properties for these unique areas.
While Dr. F.J. Trevor Burke has noted that “Despite their prevalence, these restorations do not appear to attract the attention or imagination of dentists worldwide,” this is rapidly changing. Manufacturers are finally recognizing the unique challenges of Class V restorations and investing in specialized materials to address them.
At PS Dental Services, we’re committed to staying at the forefront of these developments. Dr. Sepehri regularly attends continuing education courses to evaluate new materials and techniques, ensuring we can offer you the best restorative material for class 5 cavity treatment as technologies evolve.
The future looks bright for patients with cervical lesions – with smarter, more bioactive materials that don’t just fill the space but actively contribute to your tooth’s long-term health and stability.
Frequently Asked Questions about Class V Restorations
How long should a Class V restoration last?
One of the most common questions we hear at PS Dental Services is about longevity. The truth is, there’s no one-size-fits-all answer, but I can share what we typically see in practice.
A well-placed Class V restoration can last anywhere from 5-10 years, and sometimes even longer with proper care. The best restorative material for class 5 cavity treatments like resin-modified glass ionomers (RMGICs) show impressive retention rates—about 98.2% at 6-18 months after placement.
Several factors affect how long your restoration will serve you:
Your restoration will generally last longer on front teeth than back teeth, where chewing forces are stronger. If you grind your teeth, have high risk for cavities, or struggle with consistent oral hygiene, your restoration might need replacement sooner. And of course, the dentist’s technique matters tremendously—proper isolation, preparation design, and bonding protocol all contribute to longevity.
During your follow-up visits, we’ll monitor your restorations to catch any issues early, helping you get the maximum lifespan from your dental work.
Will the filling fix my tooth sensitivity immediately?
Good news! Most patients walk out of our office experiencing significant relief from sensitivity right after we place their Class V restoration. That uncomfortable zinging sensation when drinking cold water or eating sweet foods typically diminishes dramatically.
However, your tooth might need a little time to fully settle down. For some patients, it takes about 1-2 weeks for complete resolution as the pulp (the nerve inside your tooth) adjusts to its new protection.
If you’re still experiencing sensitivity beyond two weeks, please let us know. Persistent sensitivity might indicate that there’s still some decay beneath the filling, ongoing pulp inflammation, or possibly bite-related stress on that tooth. For particularly deep lesions, we sometimes use specialized materials like calcium silicate liners to provide extra pulp protection and promote healing.
At PS Dental Services, we always follow up to make sure your sensitivity has resolved. Your comfort matters to us, and we want to address any lingering issues promptly.
Can Class V restorations be done without a rubber dam?
While dental school textbooks might insist on rubber dam isolation for all restorations (and it is ideal for composite placements), the reality of Class V lesions sometimes makes this challenging. Many Class V cavities extend below the gumline, making rubber dam placement difficult or uncomfortable.
The good news is that we have several effective alternatives for isolation:
Dental retraction cord can gently push gum tissue away from the cavity, creating space for a dry working area. We also use cotton rolls, specialized suction devices, and absorbent pads to keep the area dry. For cases where moisture control is particularly challenging, we might recommend materials that are more forgiving in these conditions.
This is where material selection becomes especially important. The best restorative material for class 5 cavity treatment in a challenging isolation case might be a resin-modified glass ionomer or bioactive material, as these tolerate some moisture during placement better than traditional composites.
Dr. Sepehri has extensive experience managing these challenging restorations and will select the approach that offers the best combination of comfort and long-term success for your specific situation.
Conclusion
Finding the best restorative material for class 5 cavity treatment isn’t about following a one-size-fits-all approach. It’s more like choosing the right tool for a specific job – one that considers the unique aspects of your tooth, your lifestyle, and your smile goals.
Research points to resin-modified glass ionomers as offering excellent survival rates for most Class V restorations. But as we’ve explored throughout this guide, what works beautifully for one patient might not be ideal for another.
At PS Dental Services in Tigard, Oregon, Dr. Sepehri and our team take a personalized approach to every Class V restoration. We start with a thorough assessment, looking at why the lesion developed in the first place. Was it decay? Toothbrush abrasion? Acid erosion? Each cause might suggest a different material choice.
We then select materials based on both scientific evidence and our extensive clinical experience. Sometimes, the most aesthetic option is best. Other times, a material’s fluoride-releasing properties make it the clear winner for patients with high caries risk.
Our meticulous technique ensures that whatever material we choose will have the best chance of lasting for years to come. And perhaps most importantly, we don’t just “fill the hole” – we help you understand how to prevent future problems.
After all, prevention remains the most effective approach. Simple habits like regular dental check-ups, gentle but thorough brushing, appropriate fluoride use, and addressing risk factors like dry mouth can help keep Class V lesions from developing in the first place.
For those already experiencing these cervical cavities or non-carious lesions, don’t wait to seek treatment. Prompt care is essential to prevent the lesion from growing larger, relieve any sensitivity you might be experiencing, and preserve your natural tooth structure.
Our comprehensive dental care at PS Dental Services provides solutions for all your dental needs, including expert treatment of Class V lesions. We’re not just fixing teeth – we’re caring for the people behind the smiles.
Contact PS Dental Services today to schedule an appointment. Together, we’ll find the best restorative material for class 5 cavity treatment that fits your unique situation, giving you a restoration that feels good, looks natural, and stands the test of time.
Dr. Parisa Sepehri
Latest posts by Dr. Parisa Sepehri (see all)
- Free Dental Implant Consultations: Your First Step to a New Smile - May 9, 2025
- Breaking Barriers: Free Dental Implants for the Disabled - May 8, 2025
- Smile Brighter in Tigard OR with Professional Teeth Whitening - May 6, 2025
- Don’t Let Gum Disease Bite Back! Effective Periodontal Disease Treatment Options - May 5, 2025
- Smile Faster with Cerec Same Day Crowns - May 2, 2025
